B?HLER NiCu 1-IG伯樂焊絲

Description
NiCu-alloyed copper coated GMAW wire, for welding of weathering resistant constructional
steels, standard constructional steels and special constructional steels.
NiCu 1-IG wire features good weldability in the short arc mode at low voltage and in the spray
arc process with high voltage. The mechanical properties of the weld deposit, the freedom of
porosity and the bead appearance depend on the type of shielding gas used and on the other
welding parameters.
The copper content in the welding wire leads to increased resistance to atmospheric corrosion
in the weld deposit.
Approvals and Certificates
DB (42.014.08), üZ (42.014/4), ?BB, UDT
Similar-alloy Filler metals
SMAW stick electrode: FOX NiCuCr
base Materials
weather-resistant constructional steels, special grade constructional steels
S235JRW, S235J2G3 Cu, S355J2G3 Cu, Corten A, Patinax 37, Alcodur 50, Koralpin 52
ASTM A36; A283 Gr. B, C
Operating Data
shielding gases: Argon + 15 - 25 % CO 2 ? mm
100 % CO 2 1.0
1.2
Mechanical Properties of All-weld metal
(*) u s
yield strength R e N/mm 2 : 500 (≥ 420) 460 (≥ 390)
tensile strength R m N/mm 2 : 580 (500 - 640) 540 (470 - 570)
elongation A (L 0 = 5d 0 ) %: 26 (≥ 324) 27 (≥ 324)
impact work ISO-V KV J + 20 °C: 130 (≥ 380) 130 (≥ 380)
- 40 °C: (≥ 347) (≥ 347)
(*) u untreated, as-welded – shielding gas Ar + 15 - 25 % CO 2 or 100 % CO 2
s stress relieved, 600 °C/2 h – shielding gas Ar + 15 - 25 % CO 2 or 100 % CO 2
Typical Composition of Solid Wire
C Si Mn Ni Cu
wt-% 0.1 0.5 1.1 0.9 0.4