詳細描述：HT-80 hydraulic hot stamping machine output:80 tons 功能及特點：．人機介面屏幕顯示，操作便捷、直觀親和 ．適合各類基材的燙金（壓紋、磨砂、擊凸），包括：紙張、板 紙、充皮紙、塑料片、PVC、布料等。 ．可配備收卷機，自動燙印卷筒包裝紙。 ．HT-80機運轉速度每分鐘可達到42轉。 ．肘節結構設計，油馬達驅動，壓力大、效率高。 ．配備有安全保護裝置，平臺式工作面，不受紙張限制，使用方便更安全。 ．潤滑系統采用定時定量供油，保養方便可靠。 ．送燙金箔方式根據工作需要，可采用三組步進馬達同步或跳步送箔。也可以采用橫向或豎向送箔。送箔長度可隨意調，燙金箔利用率高。 ．采用進口電器元件，液壓使用意大利系列，機器性能卓越。 Functions and characteristics ．Human-machine interface screen, easy to operate, visual and kind appearance ．Apply for hot stamping(embossing, dull polishing, and projecting)on any kinds of basic ．Can be matched with take-in machine, automatic hot stamping rolling packing paper ．Speed of HT-80 can reach 42 turns per minute. ．Elbow joint structure design, oil motor driving, high pssure and efficiency. ．Matched with safety protection device, plane working face, non-limited by paper, easy and safe to be used. ．Greasing system is made use of automatic timing and constant fuel feeding, so it is much easy and reliable to maintain. ．Gold foil stamping can be used of trio stepping motor to feed in foil in phase or leapfrog required by working. Or foil can be fed in cross or vertical direction. Length of fed-in foil can be adjusted at will, and availability of gold foil stamping is much high. ．Make using of imported electric component, hydraulic system is imported from Italy, and performance is excellent.
技術參數Technical Data 型號MODEL HT-80 中心距離（毫米）Throat Depth(mm) 420 輸出（公斤）Output(kg) 80000 送箔設計（馬達式）Foil Feed Device(motor)三組（three sets） 熱板面積（毫米）Size of Hot Plate(mm) 610*900 送箔方向Foil Feed Direction 橫向或直向（front or side） 工作臺行程/毫米Stoke/mm 60 電熱（瓦）Heater Capacity(W) 9800 工作面積/毫米Table Size/mm 915*1200 溫度調節Temperature Control *高max.200℃ *大紙張面積/毫米Max.Paper Size/mm 787*10441 加壓時間/秒Dwell Time/ second 0-0.99 *小紙張面積/毫米Min.Paper Size/mm 360*340 馬力/千瓦Motor Capacity/kw 7.5 *大工作高度/毫米Max.Daylight/mm 13 電源Power Source 3ph/380v/50HZ-16kw
點擊圖片查看原圖
